Barstool Racer Parts

	Diameters - 10" Item # 1801 One Piece Construction - no welds Chrome-Plated Quality Steel Solvent-Proof Neoprene Molded Finger Grooves	$21.00
	Non-Flexing, Strong 1/4" Tempered Aluminum Alloy Item # 2294 Choice of Black Anodized or High-Buffed Finish Molded Neoprene Grips	$50.00
	Motor mount Item # M0405	$15.99
	Heavy duty idler / tensioner sprocket 5/8" ID bearing	#35 chain $11.75 #41 chain $11.75
	Sprockets To Fit Our Heavy Duty Sprocket Hub steel sprocket 4" bolt circle, 5/16" holes on 2" radius from center Chain size #40/4, teeth 60 pattern P2286 Item #2168-54	$13.00
	35 Standard Chain 48" long with connecting link pitch 3/8" roller diameter .200 between inner plates 3/16 pin diameter .141 average tensil 2,100 item # 4318	$6.50
	Polyurethane Fuel Line Twice the tensile and burst strength of vinyl and many times the abrasion resistance, this tough urethane fuel line will withstand millions of flexes.  Low kinkage and excellent grab.  1/4" x 3/8" OD. Item #1887	$1.20 per foot
	Jig Welded Spindle Kits item # 2204 5/8" x 3.75"	$16.00
	Jig Welded Spindle Kits item # 2205 5/8" x 3.75"	$16.00
	Jig Welded Spindle Kits item #2235 5/8" x 4.50"	$16.00
	Jig Welded Spindle Kits item #2236 5/8" x 4.50"	$16.00
	Jig Welded Spindle Kits item #2512 5/8" x 6.00"	$17.00
	Jig Welded Spindle Kits item #2513 5/8" x 6.00"	$17.00
	Tubular Tie Rods Only Item #8227-115 Chrome plated and light weight 5/16 -24 x 1107/16"	$9.00
	Rod End Bearing – Deluxe Male Type Item # 8249 Left side	$6.00
	Rod End Bearing – Deluxe Male Type Item # 8249 Right side	$6.00
	Our cap assembly set, consisting of a plated-steel mounting cup and gleaming chromed snap-in cap, is the perfect mate for Azusa's Steering Wheels. It fits either 1-1/2" or 1-5/8" bolt circle and practically any make of steering wheel. Item # 1877	$5.00

Two 1" live axle bearing hangers for 2 or 3 hole flangettes Item # 8127-2		$4.60
Two king pin brackets, 5/8" bore for mounting spindles Item # 8171-2		$4.00
Two king pin brackets, 1/2" bore for mounting spindles Item # 8181-2		$4.00
Two hardened steel King pins, 5/8-18 x 3.75" for bracket Item # 8445-2		$2.60
Two jackshaft bearing hangers, 1-3/8" ID Item # 8128-2		$3.80
Two Pitman arms for 5/8" shaft, 5/16" bolt hole, 1-5/8" centers Item # 8129-2		$2.00
Two rod anchors for 1/4" brake and throttle rods, 1 3/8 x 3/4" Item # 8182-2		$0.60

Complete Steering Shaft Kits Fits all steering wheels pictured above. Heavy duty Pitman arms. Holes for cotter pins in shaft & bolts. 5/8" splined shaft and hub for perfect alignment.		Item # 1868-34	$21.99