|

|
TM
Sport Bike Brake Lines by Galfer
 |
Galfer lines are made with Dupont® Teflon tubing wrapped with 16 strands
of stainless steel and coated with a clear vinyl, making the line expansion
close to zero under all conditions. The outer plastic coating protects
the bike from scratches and the fittings are nickel plated. Galfer lines
are made so the fitting can be twisted at the ends if necessary, making
the installation process much easier. Each kit includes all necessary sealing
washers and nickel plated banjo bolts. Front kits for sport bikes are 2
lines, with both lines connected to the master cylinder and directly to
each caliper, eliminating the junction block. Front 3 line kits are available
for Cruisers.Galfer Brake and Clutch lines are normally stocked with CLEAR
outer coating. Black, Blue, Red, Yellow and Smoke color coated lines are
available by “Special Order” Note: Galfer brake lines are manufactured
for Racing use and are not DOT certified.STREET BRAKE LINES* Part#’s with
-3 on the end are 3 line kitsSpeed-Bleeders make bleeding a cinch!Many
other applications not listed are available by special orderCustom and
Special Orders ; NO PROBLEM! Just email us @ sales@rnrfabrication.com or
call 786-525-5832 |
Money Orders and Cashier's may be mailed to:
R n R Fabrication LLC
6301 SW 149 Ct.
Miami Fl 33193
786-525-5832
rSite Last Updated Thursday March 25th, 2005
© 1998-2005 R n R Fabrication LLC. All rights reserved
|

Axles
Bearings
4.5" Brakes
Cables:
Brake & Throttle Kits
Centrifugal
Clutches
Chain, Links,
Guards & Tools
Fuel and Brake Fittings
5" Brakes
6" Brakes
Disc Brakes
Forks
Foot Pedals
Jackshafts
Kill Switches
Mini Chopper
Parts Page
Rims, Wheels
& Drive Hubs
Shocks
Hubs & Sprockets
Steering Parts
Spacers & Bushings
Tie Rod Ends
Spindle Kits
Tires & Tubes
Torque Converters
Vacuum and Pressure Engine Tester
Wheels
Gas Tanks & Fenders
Pocket Bike Parts
Pocket Bike and Scooter Tires
ATV Wheels
Douglas Aluminum
XR50 / CRF50 Parts
|
|