 Miami Fl 33193 786-525-5832 |
Chopper and Mini Chopper Frame parts
Have Mini Chopper or Metric Chopper project need parts. Converting that
old honda into a chopper use our frame parts to make your project that
much simpler. With our precut axle plates, gussets and more your project
will turn out as if created by the pros.
|
Home
Mini Chopper Engines
250cc Choppers
Metric Choppers
Frame Parts
Harley Davidson
Honda Cruisers
Recycled Parts
Kawasaki Cruisers
Yamaha Cruisers
Lifan 250cc Cruiser
Barstool Racers
Honda Mini Trail
CT-70 parts 
XR50 / CRF50 Parts
Z50R Parts
Go-Karts
Racing Kart Parts
Off Road Go-Kart
Lowrider Bikes
RaceWear
Mini Trike Kits
Pocket Bike Parts
ATV
Gallery
Tech Tips
FAQ's
Join our Forum
Link Page
Trade Shows
Warranty & Return
 |
Cold Rolled Steel Boss ¾” outside diameter 1” long. Fully threaded though 3/8”-16 threads. Good for mounting tanks, lights, forward controls, making axle adjusters, peg mounts, fender mounts, sissy bar mounts, etc.. Lots of uses where ever threads are needed. Part number 753816BOSS sold individually |
$6.00 | |
 |
6061 Aluminum Bungs with a 1” outside diameter stepped to fit a 7/8” hole.
Threads are 3/8” pipe thread. Must be welded. Part Number 38ALUMBUNG .sold individually |
$14.00 | |
|
6061 Aluminum Bungs with 7/8” outside diameter stepped to fit a ¾” hole
(pictured). Threads are ¼” pipe thread. Part Number 14ALUMBUNG sold individually |
$14.00 | |
 |
Cold Rolled Steel Bungs with a 7/8” outside diameter stepped to fit a ¾” hole. Threads are ¼” pipe threads for oil lines or where ever a ¼” pipe thread is needed. Must be welded or brazed. Part Number 14BUNG sold individually |
$14.00 | |
 |
Cold Rolled Steel bungs with a 1” outside diameter stepped to fit a 7/8” hole. Threads are 3/8” pipe threads for gas petcocks or oil tank drains. Must be welded or brazed. Part Number 38STLBUNG sold individually |
$14.00 | |
 |
Axle Plates—CNC Plasma cut from 3/8” HR Steel plate, these axle plates are designed with a 24-degree top leg angle and 28-degree bottom leg angle for your typical low rigid frame. Axle slot is ¾” x 2” long but slightly undersize for finish with a file, die grinder or mill. As-cut by plasma, requires additional finishing Part number CHAXPLT .sold as a set Shipping weight 4# |
$60.00 | |
 |
Axle Plates— Similar to the plates above, these 3/8” plates simply have extra material in the front edge for different appearance or customizing. As-cut by plasma, requires additional finishing. Part number CHAXPLT2.sold as a set Shipping weight 4# |
$60.00 | |
 |
Axle Plates—Universal Axle plates. These 3/8” thick HRS plates have rounded tabs that allow flexibility in the angles of the legs that attach to them. The hump at the top of the plate forms a place for a hole for fender braces or sissy bars. As cut by plasma, requires additional finishing. Part number UNIPLT sold as a set Shipping weight 4# |
$60.00 | |
 |
Axle Plates—Softail style axle plates for swingarm construction. These plates are cut from ½” HRS. Thick enough that the front edge can be drilled and threaded for a hidden axle adjuster screw. For typical 25-1/2 degree up and down leg angles. Part Number STAXPLT sold as a set Shipping weight 5# |
$65.00 | |
 |
Axle Plates—Flame styled axle plates cut from 3/8” HRS. These plates have the rigid frame angles of 24 degrees up and 28 degrees down. These plates will make your frame stand out is a crowd. A good example of what can be done with CNC plasma. MechWerks has the ability to make custom plates to your desires. Contact us for special needs. Part number FLMPLT sold as a set Shipping weight 6# |
$70.00 | |
 |
Hidden Axle Plates—Parts kit to make hidden axle plates! Outside J-bends are ¼” HR steel. Slotted axle plates (2” axle adjustment) are plasma cut from 3/8” HR steel. Also included are aluminum cover plates, countersunk stainless socket screws for the covers, cover tabs, stainless adjuster screws, lock nuts. WELDING and Assembly required. Click here for assembly instructions. Part Number HIDAXPLTKIT sold as a set Shipping weight 4# |
$85.00 | |
 |
Tube Caps—Just what you need to finish off the end of a 1-1/4” tube. Especially useful where axle plates fit into the frame. Click here for an article on using these caps. Part Number TCAP sold individually Shipping weight 1/4# |
$4.00 | |
 |
Adjusters— Cut from ¾” cold rolled steel bar, these adjusters are 1” long and have an internal 3/8”-16 thread. Adjusters are welded ahead of axle slot. A long 3/8”-16 cap screw pushes against axle spacer to set axle adjustments. These can also be used for forward foot peg mounts and other frame mounts needing a 3/8” thread point. Part number 753816BOSS .sold individually Shipping weight 1# |
$10.00 | |
 |
These steering necks are made from 2” 1026 carbon steel DOM tubing; 5-5/8” long with a 1-1/4” through bore and counter bored for standard HD or Big Twin aftermarket chrome steering cups and bearings. The outside is mill finish and will easily come off with sanding prior to welding to your frame. Since these have a 3/8” thick wall, these necks are suitable for large tube frames and can be machined to any profile desired. (It is recommended that a minimum wall thickness of .188” is maintained at any section of the neck.) Part number DOMNECK5625 sold individually Shipping weight 3# |
$65.00 | |
 |
A stylish neck for your chop is this tapered billet neck for use with HD
or aftermarket Big Twin chrome press-in bearing cups. Outside ends are
just under 2” diameter tapering to 1.660” in the middle section. Inside
is bored through 1-1/4” and ends counter bored for proper press fit with
bearing cups. The neck is cut from a billet of 1018 Cold Rolled carbon
steel and hand sanded to remove tooling marks.Part number TAPERNECK5625
sold individaully Shipping weight 3# |
$126.00 | |
 |
Softail Parts— CNC Plasma cut Custom softail style pivot stanchion form the rear of a typical suspension frame and provide the attachment point for the swingarm. Cut from ½” HR steel and have the pivot point drilled to ¾”. No other holes, no bends, as-cut requiring additional finishing. Also pictured are softail style rear engine and front transmission mounts. Part number STPLT (stanchions) Shipping weight 14#. |
$115.00 | |
|
Rear engine and trans mount Part number STMTS (rear engine mount, front transmission mount) . Shipping weight 3#. |
$50.00 |
| Related Items |
 Lighting |
 Engines |
 Gas Tanks |