Harley Parts

Finally, a highway peg system that does not have to mount to the guards. If you are a rider whose legs are too short or too long to use a crash bar mounted highway peg, then we have your answer.

The Cruisin Pegs are hand machined and designed to mount to the underside of the stock Harley Davidson floorboards.

Models they fit: Softail FatBoy FLSTF, FLSTFI, Deluxe Softail, Springer Softail, Heritage Softail Classic, Road King FLHRS/FLHRI, Road King Classic FLHRCI, Road Glide FLTRI, Electra Glide Standard FLHT/FLHTI and the Electra Glide Classic FLHTC/FLHTCI. They will also fit Indians with factory floorboards. Currently they will not fit the Screaming Eagle Floorboards, Road King Custom or the Ultra Classic Electra Glide due to the lowers.

They have a pivot pin feature designed to allow for three positions:
1. Up Close (same distance as the rear brake pedal)
2. Middle
3. Way Out for 6' 3'- 6' 4' riders

The foldable chrome footpegs measure 5" long, have a machined texture for traction and a catch at the end of the peg to keep a rider's foot in place.

Installation is easy: remove the rubber inserts and drill holes in the steel floorboard base using the provided template. Then bolt the Cruisin Pegs to the steel reinforcing plate that is included. Replace the rubber pads and go for a ride. Install time is approx 45 min.

They have a pivot pin feature designed to allow for three positions:
1. Up Close (same distance as the rear brake pedal)
2. Middle
3. Way Out for 6' 3'- 6' 4' riders

The foldable chrome footpegs measure 5" long, have a machined texture for traction and a catch at the end of the peg to keep a rider's foot in place.

Installation is easy: remove the rubber inserts and drill holes in the steel floorboard base using the provided template. Then bolt the Cruisin Pegs to the steel reinforcing plate that is included. Replace the rubber pads and go for a ride. Install time is approx 45 min.

Harley Chrome Bullets

Conceal that unsightly front axle in a new and stylish way. Slide Aeromach's Fork Bullets over the bottom of the fork slider and simply tighten two set screws. Sleek design. Extreme eye catcher!

Bullets fit up to 04' Softail and FXDWG bikes.

Baron's Bullet Tachometer

This is the accessory you've all been waiting for! Baron's universal Bullet Tach features a compact "snub-nosed" design with styling that provides a sleek but aggressive look to your bike. Uniquely designed, Baron's Bullet Tach can mount in several locations on the handlebar, accommodating any other accessory you may have already installed. Bolt the tach to your desired location, pop-off the tach's removable bezel, and simply rotate the tach face back to vertical for a perfect view.

This chrome-plated assembly comes complete with an accurate, 8000-rpm electronic mini-tach that provides critical rev information at a glance. Concealed wiring routes from bottom of tach's handlebar clamp and connects easily to your bike's ignition coils with provided crimp-on connectors.

Will fit all motorcycles with 1-inch handlebars, with or without windshields. A totally custom look that's fully functional! Now available with a white-faced dial option and in sizes to fit either 1-1/4" or 1-1/2" handlebars.

Tach measures 3 1/2" in length by 3.0" in diameter

Baron's Bullet Tachometer

This is the accessory you've all been waiting for! Baron's universal Bullet Tach features a compact "snub-nosed" design with styling that provides a sleek but aggressive look to your bike. Uniquely designed, Baron's Bullet Tach can mount in several locations on the handlebar, accommodating any other accessory you may have already installed. Bolt the tach to your desired location, pop-off the tach's removable bezel, and simply rotate the tach face back to vertical for a perfect view.

This chrome-plated assembly comes complete with an accurate, 8000-rpm electronic mini-tach that provides critical rev information at a glance. Concealed wiring routes from bottom of tach's handlebar clamp and connects easily to your bike's ignition coils with provided crimp-on connectors.

Will fit all motorcycles with 1-inch handlebars, with or without windshields. A totally custom look that's fully functional! Now available with a white-faced dial option and in sizes to fit either 1-1/4" or 1-1/2" handlebars.

Tach measures 3 1/2" in length by 3.0" in diameter

Baron's Bullet Tachometer

This is the accessory you've all been waiting for! Baron's universal Bullet Tach features a compact "snub-nosed" design with styling that provides a sleek but aggressive look to your bike. Uniquely designed, Baron's Bullet Tach can mount in several locations on the handlebar, accommodating any other accessory you may have already installed. Bolt the tach to your desired location, pop-off the tach's removable bezel, and simply rotate the tach face back to vertical for a perfect view.

This chrome-plated assembly comes complete with an accurate, 8000-rpm electronic mini-tach that provides critical rev information at a glance. Concealed wiring routes from bottom of tach's handlebar clamp and connects easily to your bike's ignition coils with provided crimp-on connectors.

Will fit all motorcycles with 1-inch handlebars, with or without windshields. A totally custom look that's fully functional! Now available with a white-faced dial option and in sizes to fit either 1-1/4" or 1-1/2" handlebars.

Tach measures 3 1/2" in length by 3.0" in diameter

Al's PeaceMaker Road King Saddlebag Locks

New from Al's Modifieds are the PeaceMaker locks for Road King Classic saddlebags. Carved out of billet aluminum using CNC technology for precise manufacturing tolerances. Beautifully chrome plated and easy to install in about an hour.

Prevent your saddlebags and their contents from theft. PeaceMaker lock sets come complete with chrome lock plate, lock assembly, hardware and instructions.

Chrome Billet Locks for the Tour Pack

"Now available! A chrome billet lock system for the Tour Pack. Comes complete with install instructions."

AM-Tourpack $73.00 each

Laydown License Plate®

Since 1995, Al's Modifieds® has made the Laydown License Plate® for 5 speed FL models from 1980 to present, including Road Kings, Road Glides and Custom Dressers. Al's LLP's® are show chromed, custom license plate brackets that lay the plate at the same angle as the rear fender and saddlebags, while tucking it down low over the tail light. Al's LLP's® are compatible with factory detachable products.

AM-ALS LLP $123.00 ea

Harley Vertical License Flame Accent

Made from polished stainless steel. This wicked flame bolts to the bottom, backside of the license frame and hangs down. A must for a bike with a flame paint theme.

Biker for Life License Frame

"Ride Hard, Ride Free....Biker For Life"

This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.

LED Illuminated License Frame

This machined license plate holder is chrome plated and has a full spectrum LED that gives a clean look to your license assembly. Fits all license plates that measure 7"L X 4"W.

AM-2485CLED LED License frame $113.00 ea.

6 Inch Pullback Risers - Long Necks

Not happy with your equipment? Are your parts lacking in length? If 4 inches of rise is just not enough for you and your passenger, then we have your aid. Aeromach has doubled the fun by pumping out a total of 6 inches of chromed, billet delight.

These risers were designed to come way back and work great with drag bars. Use your stock 1/2 X 13" bolts to install. The "Reaper" Top Clamp can be added for a new look.

AM-3510C Harley 6 inch pullback risers - long necks $143.00 pair

7 inch "Chopper Risers" for Harley's

Looking for risers that have attitude? Now you can choose your own style of caps to go with them. We designed these risers to bolt right on to your triple trees using your stock 1/2 X 13 bolts. They work extremely well with 18, 25 & 35 degree drag bars in 1 inch diameter.

Longer control (clutch and brake) cables may be needed depending on the drag bar you select. Installation is simple and the top bolts are concealed by the cap. The 7" risers are chrome plated and made from extruded billet aluminum.

7 inch "Chopper Risers" for Harley's

Looking for risers that have attitude? Now you can choose your own style of caps to go with them. We designed these risers to bolt right on to your triple trees using your stock 1/2 X 13 bolts. They work extremely well with 18, 25 & 35 degree drag bars in 1 inch diameter.

Longer control (clutch and brake) cables may be needed depending on the drag bar you select. Installation is simple and the top bolts are concealed by the cap. The 7" risers are chrome plated and made from extruded billet aluminum.

Harley Flame Grips

Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.

AM-2300C Harley Flame Grips $117.00 pair

Harley Flame Grips - Domed Cap Style

Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.

Grip End pc for mounting mirrors to Aeromach grips

The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.

*Note, mirrors are sold seperately.

Knuckle Levers for Harley Davidson & American Customs

These chrome Knuckle Levers will add some "attitude" to your bike. These aggressive levers are hand machined from T6 extruded billet aluminum and mount to all Harley Davidson's for 1996-2004 with manual clutch except 2004
Sportster. Also fit Indian, Big Dog and American Iron Horse. Currently not available for VRod (yet).

AM-9400C For Stock HD Controls, Indian, Big Dog & American Iron Horse $147.00 pair

AM-9450C For Performance Machine Controls $147.00 pair

AM-9430C For Jay Brake Controls $147.00 pair

Pistol Grip Levers for Harley Davidson and American Customs

Grab a fist full when you squeeze on these pistol grip levers. They are CNC machined from extruded billet aluminum that is chrome plated. The levers will fit all HD's from 1996-2004 except for VRod and 2004
Sportster.

Tribal Spike Axle Cover

Bite tight with two set screws per part. For Harley-Davidson. Fits 1988-2004 XL,
1988-2000 FXR, 1991-2004 Dyna, 1985-2004 Softail (except 1984-1999 Springer & Deuce), 1984-1999 FLT (except Road King & Dresser), & 1980-1986 FXWG.

Road King, Road Glide & Dressers

Sold in pairs.

AM-4540C Tribal Spike Axle Cover $102.00 pair

Torched Skull Axle Covers

Bite tight with two set screws per part. For Harley-Davidson. Fits 1988-2004 XL, 1988-2000 FXR, 1991-2004 Dyna, 1985-2004 Softail (except 1984-1999 Springer & Deuce), 1984-1999 FLT (except Road King & Dresser), & 1980-1986 FXWG

Sold in pairs.

AM-4520 Torched Skull Axle Covers $121.95 pair

Chrome Fusion Clamps for Stock Harley Controls

The Chrome Fusion Clamps are sold in pairs and replace the ugly, stock black clamps. Come complete with stainless steel button head screws for mounting. Fit Softail and Road King models.

AM-9940C Harley Chrome Fusion Clamps $50.45 pair

Iron Cross Brake Light -Chrome Billet

A total of 45 RED LEDs. Comes with dual intensity (high/low). Our Iron Cross can be used as a flushmount (by separating chrome bezel and lense from the bucket then sandwiching the bucket and LEDs behind the fender /bag and bolting to the chrome bezel and red lens on the outside) or straight mounted on the outside of motorcycle fenders, saddlebags. or car fenders.

Sold individually.

Dimensions: 2.25"Length x 2.25"Height x .85"Depth

Iron Cross Turn Signals - Chrome Billet

Can be mounted to the rear fender. Comes with dual intensity (high/low). All LEDs function in running mode.

Dimensions: 2.25"Length x 2.25"Height x .85"Depth
A total of 45 RED LEDs.

Speedball Front Axle Covers

Create the illusion of speed even at a standstill. Machined from T6 billet aluminum, chrome plated.

AM-4580C 86'-up Softails, Dyna's & Sporty's $98.00 pair


AM-4585C 00'-up Road Kings only $98.00 pair

BareBacks Quick Release Saddlebag System

This new patented system works flawlessly with OEM saddlebags and can be used with or without docking hardware for sissy bars. Now your bags can be removed in about 3 seconds. The BareBacks are made from 303 stainless steel and work with Heritage Softail, Heritage Softail Springer, Fatboy, Softail Standard & Dyna.

Also available are chrome cap covers to give a clean look when the bags are off the bike.

Get Back! Leather Straps

The Get Backs! clip to your clutch lever and have a quick release so you can
remove them at a moment's notice. This Old School strap is convenient for
annoying dogs that like to chase bikes.

The strap is 29" in length and available in black only. Fits all clutch
levers

AM-GBLS Leather Get Backs $48.00 ea