HONDA PARTS

	Chrome Bullets for Honda Motorcycle Conceal that unsightly front axle and ugly bottom hardware in a new and stylish way. Starting with a three-pound piece of 6061-T6 billet aluminum, we CNC machine this into a bullet-shaped cover with a final weight of 3/4 pound each! Aeromach's Fork Bullets slide easily over the bottom of the front lower legs and grip tightly with two stainless steel set screws. Extreme eye catcher! Honda parts fit models: Aero, VTX 1300 Custom & Retro, VLX 600, Up to 01' Sabre, Up to 99' Valkyrie. Includes special bolt kit for Honda applications.	AM-5000C HONDA CHROME BULLETS $144.90/pair
	Honda Elite Seat Trim A custom stainless steel unit that bolts into the rear fender where your passenger pad used to be. Highly polished. Fits OEM, Corbin and Mustang seats on either Valkyrie or Interstate.	AM-4700C ELITE SEAT TRIM $119.95
	Tail Spikes for VTX Our accessory designer at Aeromach has a penchant for sharp objects. When he was off his ritalin, he created these sinister little objects for the rear fender struts. Aeromach's Tail Spikes are made of polished stainless steel and thread into the VTX fender strut replacing the stock allen head bolts. They keep the curious from getting too close! Tail Spikes will fit Retro model. Sold in sets of 6 only.	VTX TAIL SPIKES $78.95/set
	Rear Replacement Cover If you have a sidemount license plate and need to hide that mutant piece of metal Honda welded (yes, welded!) to the rear fender, then check out our Rear Plate Replacement (RPR). It is polished stainless steel and installs easily. Comes complete with two button head screws to mount. Made to work with stock turn signals.	AM-8230SSP REAR REPLACEMENT COVER FOR HONDA VTX 1800/1300 C $29.95 ea
	Honda VTX Vertical Sidemount Tag Holder The stock license plate assembly is the most detestable thing on a VTX. Not only is it ugly, but it also hides that beautiful fat rear tire! Aeromach has the cure - our stainless steel, Vertical Sidemount Tag (VST) holder that sits on the left side of the bike and utilizes the stock license lamp. In this kit you will get the VST, new wires to run the stock license lamp and all hardware necessary to install. And you won't have to be a wizard mechanic to assemble it all	AM-8300SSP HONDA VERTICAL SIDEMOUNT TAG HOLDER $204.95
	Stainless Steel License Back Plate Get rid of your stock reflectors with our custom back plate. It will work on the VTX, Aero, Valkyrie, VT 1100 Tourer, and ACE 1100. Fits all states except: CO, LA, MA, MD, NJ, OH, PA, RI, WI, WY, due to larger size. Installs easily using the stock bolts	AM-8250SSP LICENSE BACK PLATE $52.45
	Honda VTX Extreme 1800 Chrome License Frame Size always matters! Show the guy you just left in the dust, what passed him. Made from chrome billet aluminum. Will not fit Retro model VTX.	AM-2475EXC HONDA VTX 1800 MOTORCYCLE LICENSE PLATE FRAME $57.45 ea.
	VTX Retro Laydown Back Plate Made from polished stainless steel. Fits VTX 1300, VTX 1800 Retro, and all license plates that measure 7"L X 4"W. Frame not included.	AM- 4380SSP VTX RETRO LAYDOWN BACK LICENSE PLATE $52.45
	Honda VTX Retro 1800 Chrome License Frame Retro 1800"! Now the competition can read what just passed them. Made from chrome billet aluminum. Fits all license plates that measure 7"L  X 4"W.	AM-2495VTXRC $57.45
	LED Illuminated License Frame This machined license plate holder is chrome plated and has a full spectrum LED that gives a clean look to your license assembly. Fits all license plates that measure 7"L X 4"W.	AM-2485CLED LED License frame $114.95 ea.
	Biker for Life License Frame "Ride Hard, Ride Free....Biker For Life" This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.	AM-2455C Biker For Life License Frame $57.45 ea
	Extreme VTX License Frame A killer chrome license frame with the VTX model branded on. Machined from billet aluminum. Fits all license plates that measure 7"L X 4"W. Fits Honda VTX 1800 & 1300 Retro models only.	AM-2465C Extreme VTX License Plate Frame $57.45 ea
	Extreme Chrome License Frame Machined Chrome Billet License Frame for vertically mounted license plates. You ride extreme, why not post it?	AM-2470EXC EXTREME CHROME MOTORCYCLE LICENSE FRAME $57.45 ea.
	Vertical License Flame Accent Made from polished stainless steel. This wicked flame bolts to the bottom, backside of the license frame and hangs down. A must for a bike with a flame paint theme.	AM-2490SSP VERTICAL MOTORCYCLE LICENSE FLAME ACCENT $29.95 ea.
	VTX Cruisin' Pegs Now you can kick back in comfort with the new Crusin' Pegs for the VTX. These high quality, CNC machined pegs are chrome plated and have a textured surface for foot grip. The pegs are attatched to chromed steel brackets that bolt directly on to the two hex head bolts located in front of the foot pegs. The Cruisin' Pegs will work with Aeromach brand Floorboards. The Cruisin' Pegs will NOT work with Engine Guards, no matter what. Installation is simple. Remove one hex head bolt at a time and replace by passing bolt through Cruisin' Peg bracket. Adjust peg angle to your comfort. The pegs will fold up in tight spots. Fits Honda VTX 1800 Custom only Cruisin Peg Measurements: Place feet 4" Forward Out 11" from bike to the end of the foot peg. The foot peg is 6.25" long	AM- 6330C MOTORCYCLE CRUISIN' PEGS $188.95 pair

Billet Warheads for Front Axle Concealment Drop the bomb! The next generation has arrived. Are you ready? These mean little monsters slide over your forks and are designed to portray aggressive, unruly and unsocial behavior. Forget what everybody else is bolt'n on their bike! You lead the trend. Guaranteed to make em circle and stare at the next rally. Warheads are machined from extruded billet aluminum and chrome plated. They bite on with two set screws per part. Honda parts fit models: Aero, VTX 1300, VLX 600, Up to 01' Sabre, Up to 99' Valkyrie. Includes special bolt kit for Honda applications. Come in Smooth and Speed Milled. Chrome Warheads & Bolt Kit $144.90 pair Honda Valkyrie Dipstick Chrome Cover     AM-2450HC HONDA VALKYRIE DIPSTICK CHROME COVER $19.99 ea   Billet Drink Holder & Stainless Steel Cup motorcycle drink holder A cup holder that really works! Keeps coffee hot and water cold (not to mention anything else you put in it). Made to mount most anywhere on a handlebar. Available in Chrome, Black or Silver Anodized. 1" or 1.25" bars. a.. Patented bracket and faceted ring are constructed of machined aluminum. a.. 16-oz. cup is 100% stainless steel-insulated and spill-proof. a.. Detachable components make the task of storage quick and effortless. AM-8420C Chrome Ring for 1" bars $79.95 ea AM-8425C Chrome Ring for 1.25" bars $79.95 ea AM-8430Bk Black Ring for 1" bars $74.95 ea AM-8435Slvr Silver Ring for 1" bars $74.95 ea

Honda Master Cylinder Covers

Our CNC-machined, chrome-plated aluminum covers replace your generic stock master cylinder covers. Comes complete with two stainless-steel button head replacement screws for ultra-clean look!

The covers will fit: Valkyrie, Interstate, Goldwing, Sabre, Aero, ACE, Magna, Spirit, Shadow, VT750 & VLX 600.

Also fits VTX.

AM-5080CM Honda Master Cylinder Cover - milled $41.95/pair
AM-5080C Honda Master Cylinder Cover- smooth $41.95/pair
AM-5080DC Honda Master Cylinder Cover - diamond $41.95/pair
AM-5080RPTC Honda Master Cylinder Cover - reptile $41.95/pair

For Single Master Cylinder Applications:

AM-5085CM  Honda Master Cylinder Cover - milled $20.95/ea.
AM-5085C  Honda Master Cylinder Cover - smooth $20.95/ea.
AM-5085DC  Honda Master Cylinder Cover - diamond $20.95/ea.
AM-5085RPTC  Honda Master Cylinder Cover - reptile $20.95/ea.

Diamond Master Cylinder Covers

New "diamond-cut" master cylinder cover design!

The covers will fit: Valkyrie, Interstate, Goldwing, Sabre, Aero, ACE, Magna, Spirit, Shadow, VT750 & VLX 600

Also fits VTX.

AM-5080DC Honda Diamond M/C Cover - Dual M/C $41.95/pair
AM-5085DC Honda Diamond M/C Cover - Single M/C $20.95/ea

Chrome Fusion Master Cylinder Clamps

Chrome Fusion replaces your ugly, stock grey master cylinder clamp. Some bikes will require two Chrome Fusion clamps. Make your selection below.

VTX 1800 require a pair.

AM-9930C  Chrome Fusion Clamps - pair $52.45
AM-9935C  Chrome Fusion Clamp - single $31.45

Extreme 1800 Brake/Clutch Reservoir Covers

AM-5080EXC "Extreme 1800" Brake & Clutch Reservoir Covers $41.95 pair

Retro Brake/Clutch Reservoir Covers

Covers with "Retro" machined in! The covers come complete with two stainless-steel button head replacement screws for ultra-clean look!

Available in singles or pairs depending on your bike.

AM-5085RC "Retro" Brake & Clutch Reservoir Covers - Single $20.95
AM-5080RC - "Retro" Brake & Clutch Reservoir Covers - Pair $41.95

Reptile Brake/Clutch Reservoir Covers

AM-5080RPTC Reptile Brake & Clutch Reservoir Covers $41.95 Pair
AM-5085RPTC Reptile Brake & Clutch Reservoir Covers $20.95 Single

Flame Brake/Clutch Reservoir Covers

Comes complete with two stainless-steel button head replacement screws for ultra-clean look! Available in singles-$20.95 or pairs- $41.95 depending on your bike. Please check the hand controls on your metric bike to determine if you have a manual clutch or hydralic. A single cover is all that is needed for manual and a pair for bikes with hydralic clutches and brakes.

The covers will fit: Valkyrie, Interstate, Goldwing, Sabre, Aero, ACE, Magna, Spirit, Shadow, VT750 & VLX 600

*Note, will not fit: 96' & older Honda or VStar.

Flame Brake & Clutch Reservoir Covers - Single $20.95
Flame Brake & Clutch Reservoir Covers - Pair $41.95

Pistol Grip Style Levers for VTX and Valkyrie

Grab a fist full when you squeeze on these pistol grip levers. They are CNC machined from extruded billet aluminum that is polished to a high shine. The levers measure 8.25" L X 1" W and work great with the ISO grips. Work with stock or aftermarket control cables.

Redesigned to be thinner.

AM- 8020P Pistol Grip Levers for VTX 1800 & Valkyrie $134.95/pair

AM- 8000P Pistol Grip Levers for VTX 1300, Sabre, ACE, Aero, Spirit, Shadow, VT 750, VLX 600, Magna $134.95/pair

Knuckle Levers for Honda VTX

The VTX has the attitude, now add the aggression with Aeromach new "Knuckle" Levers. These levers are hand machined from T6 extruded billet aluminum and mount to stock controls for Honda VTX 1800 Custom & Retro models.

Polished finish to match factory controls. Ride on the edge!

AM-9480P Knuckle Levers for VTX 1800R & C $149.95 pair

Tribal Flame Grips

Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.

The stock handlebars on metric bikes are 1" diameter.

AM-2350C Metric Tribal Flame Grips $119.95 pair

Smooth Grips

The Billet Grips are made from solid T6 billet aluminum. These machined grips are chrome plated and perfectly smooth. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip with Aeromach's "Grip End" piece. The billet grips are for 1" diameter handlebars and fits almost all metric cruisers. The stock handlebars on metric bikes are 1" diameter.

AM-2400C Smooth Motorcycle Grips $119.95 pair

Grip End piece for Mounting Mirrors to Aeromach Grips

The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.

*Note, mirrors are sold seperately.

AM-2285LC Grip End for mounting Aeromach motorcycle mirrors (left) $46.95

LED Replacement for Stock VTX Tailight 128 total Red LED's. You have your choice of replacing the Tail/Brake light only or upgrading and having the LED also become your left and right turn signal. How this happens is by using 40 of the LED's to flash left when you operate the turn signal. 40 LED's are also dedicated to the right. This gives you the option of removing your stock, rear turn signals. Check with local traffic laws before modifying your bike. The remaining 48 LED's operate in the center. Both LED replacement boards fit into the stock tailight/lens. AM-4350 HONDA TAILIGHT AND BRAKE LIGHT ONLY $124.99 ea. AM-4360 HONDA TAILIGHT, BRAKE LIGHT AND TURN SIGNALS $134.99 ea. Iron Cross Brake Light -Chrome Billet A total of 45 RED LEDs. Comes with dual intensity (high/low). Our Iron Cross can be used as a flushmount (by separating chrome bezel and lense from the bucket then sandwiching the bucket and LEDs behind the fender /bag and bolting to the chrome bezel and red lens on the outside) or straight mounted on the outside of motorcycle fenders, saddlebags. or car fenders. Sold individually. Dimensions: 2.25"Length x 2.25"Height x .85"Depth AM-5120LED Iron Cross Chrome Billet Brake Light $120.00 ea Iron Cross Turn Signals - Chrome Billet   Can be mounted to the rear fender. Comes with dual intensity (high/low). All LEDs function in running mode. Dimensions: 2.25" Length x 2.25" Height x .85" Depth A total of 45 RED LEDs. AM-5130LED $250.00 pair

Honda Motorcycle PullBack Risers

These Honda Pullback Risers place your hands into a natural comfort zone by raising the bars 2" and putting your grip point 1-1/2" closer to you, while allowing you to retain your stock throttle and brake cables. Our Pullback Risers come with their own "split caps" for mounting, but the original Honda top clamp will fit. The Pullback Risers are simple to install and best of all, do not require any drilling of the triple clamps! All stainless steel hardware is included. Fits all Valkyrie, Aero, Magna, Sabre and VLX 600 models. Will fit Aero with Memphis Shades windshield.Choose the correct application when checking out. NOTE: Sabre will need longer cables

HONDA PULLBACK RISERS $134.95/pair

Fatty Pullback Risers for 1 1/4" Fat Bars

Did you ever want to use a 1.25" handlebar on your bike but could get it to work because the riser spread on your metric bike was wider than American bikes? We thought those thick bars would look great so we stepped this special riser to fit all varieties of 1.25" handlebars, whether they are White Bros Burly Bars, Wild 1 chubbys or Drag specialties, our risers will make them work. Pictured is a 1.25" White Bros Burly Bar-Classic

AM-4320C 4" FATTY PULLBACK RISERS $139.95 ea.

6 inch Pullback Risers for VTX in polished finish 

Looking for more comfort in your riding position? Try our 6" CNC machined, custom billet aluminum risers for the VTX. They bolt on easily and are made to accept the stock speedo housing. To install them simply unbolt the stock risers from below the triple tree and unscrew the four allen head bolts from the speedo housing on the top. Install the Aeromach risers using the bolt kit we provide and replace the stock speedo housing using the stock bolts.

The 6" risers are polished aluminum to match the stock housing. The pullback is 1 1/2" and raises the handle bars 1 1/8" up. Stock control cables and wiring will work fine.

AM-3490P VTX MOTORCYCLE 6" PULLBACK RISERS $129.95 Pair

4 inch Pullback Risers for VTX Retro

These Pullback Risers place your hands into a natural comfort zone by raising the handlebars 2" and putting your grip point 1 1/2" closer to you, while allowing you to retain your stock throttle and brake cables. Our Pullback Risers come with their own "split caps" for mounting. The Pullback Risers are simple to install and best of all, do not require any drilling of the triple clamps! To install them simply unbolt the stock risers from below the triple tree and unscrew the four allen head bolts from the stock top clamp. Install the Aeromach risers using the bolt kit we provide. All stainless steel hardware for installation is included. Made from extruded billet aluminum, chrome plated.

AM-4345C 4" PULLBACK RISERS for VTX Retro $134.95 Pair

AM-4120C  4" PULLBACK RISERS for VTX RETRO 1300 $134.95 Pair

7 inch "Chopper Risers" for Honda

Looking for risers that have attitude? Chances are, if you wanted a chopper style riser, you had to buy a set that were made for HD and you had to modify your bike. We designed these risers to bolt right on to metric bikes with M12 bolts. They work extremely well with 18, 25 & 35 degree drag bars in 1 inch diameter.

For most bikes, longer control (clutch and brake) cables will be needed depending on the drag bar you select. Installation is simple and the top bolts are concealed by the cap. You select your style of caps: "Dome" or the radical "Tribal". The 7" risers are chrome plated and made from extruded billet aluminum. Come with hardware for installation.

Please indicate which Honda model you own!

AM-3900C 7-INCH CHOPPER RISERS WITH DOMED CAP $134.95 Pair
AM-3910C 7-INCH CHOPPER RISERS WITH TRIBAL CAP $134.95 Pair

 Inch Pullback Risers - Long Necks

Not happy with your equipment? Are your parts lacking in length? If 4 inches of rise is just not enough for you and your passenger, then we have your aid. Aeromach has added 2" to make a 6" pullback riser that works with factory cables. These risers come way back and were designed to work on VTX 1800R, 1300 R & 1300 C models. The control cables for Retro models need to be longer if using stock bars. No cable change when using drag bars on 1800R. Stock cables will work for the 1300 C model. For the 1300 C model you will gain 1" up and 1" back. If you use the 35 degree drag bars we sell, you will gain approx. 3" closer to you and still use the stock cables. Overall, the 6" pullback risers work great with drag bars.

VTX 1300 C

AM-3680C 6" PULLBACK RISERS FOR VTX 1800R $144.95
AM-3620C 6" PULLBACK RISERS FOR VTX 1300C $144.95

Reaper Top Clamp

This one piece top clamp is CNC machined from T6 billet aluminum and dipped in chrome.

Note: The Reaper Top Clamp fits only Aeromach pullback risers.

AM-3430C VALKYRIE, MAGNA & SABRE $52.45

AM-3570C VTX MODELS $52.45