Kawasaki Parts and Accessories

4"  Kawasaki PullBack Risers

Our PullBack Risers come with their own "split caps" for mounting. The PullBack Risers are simple to install and best of all, do not require any drilling of the triple clamps!

All stainless steel hardware is included. Fits all Vulcan 800, 1500, 1500FI, Nomad, Drifter FI, 1500 classic carb, 1600 Classic.

We now have new 4" Pullbacks for 1600 Classic models

Kawasaki Floorboard Cruisin' Pegs

The Cruisin' Floorboard Pegs mount to your stock running boards, are chrome plated to match the brake and shift lever and will not conflict with engine guard bars. Pegs also retract for safety or for maneuvering in tight areas. Heavy-duty construction utilizing laser and CNC technology. A must for long rides!

Please note: Cruisin' Floorboard Pegs work best for riders 5'-9" and above, and do not fit with the "Cobra" brand engine guards.

COMING SOON! Floorboard Cruisin' Pegs for 1600 & 2000 Vulcan

AM-5320VC KAWASAKI CRUISIN' PEGS $188.95/pair

Chrome Bullets

Fits Kawasaki models: 1500 Classic, 800 Classic and 800, 1500 Nomad.

Baron's Bullet Tachometer

This chrome-plated assembly comes complete with an accurate, 8000-rpm electronic mini-tach that provides critical rev information at a glance. Concealed wiring routes from bottom of tach's handlebar clamp and connects easily to your bike's ignition coils with provided crimp-on connectors.

Will fit all motorcycles with 1-inch handlebars, with or without windshields. A totally custom look that's fully functional! Now available with a white-faced dial option and in sizes to fit either 1-1/4" or 1-1/2" handlebars.

Tach measures 3 1/2" in length by 3.0" in diameter

BARON'S BULLET TACH - 1" Handlebar $199.95
BARON'S TACH - 1-1/4" Handlebar $220.99
BARON'S BULLET TACH - 1-1/2" Handlebar $229.99

Biker for Life License Frame

"Ride Hard, Ride Free....Biker For Life"

This chrome frame is machined from T6 aluminum and fits all license plates that measure 7"L X 4"W. Comes complete with stainless steel mounting hardware.

LED Illuminated License Frame

AM-2485CLED LED License frame $114.95 ea.

"Mean Streak Clean Kit"

New from Aeromach Mfg. We designed a Kit to replace the ugly stock license assembly. The Kit consists of

1. Stainless Steel Back Plate
2. A LED bar to illuminate the license
3. Chrome billet frame.

Stock Turn Signal Relocator

This part will allow you to hang the stock turn signals behind the clean kit without interference. It is made from mirror finish, stainless steel and uses 2 stock bolts to attach. The turn signal wires will not need to be severed to install the relocator. To install, remove the OEM plastic license assembly and re-use the stock hardware to mount the Relocator.

Can be used with Aeromach' s Clean Kit and Vertical Side Mount Tag Holder.

This piece can be ordered separately.

Iron Cross Brake Light -Chrome Billet

A total of 45 RED LEDs. Comes with dual intensity (high/low). Our Iron Cross can be used as a flushmount (by separating chrome bezel and lense from the bucket then sandwiching the bucket and LEDs behind the fender /bag and bolting to the chrome bezel and red lens on the outside) or straight mounted on the outside of motorcycle fenders, saddlebags. or car fenders.

Sold individually.

Dimensions: 2.25"Length x 2.25"Height x .85"Depth

AM-5120LED Iron Cross Chrome Billet Brake Light $120.00 ea

Iron Cross Turn Signals - Chrome Billet

Can be mounted to the rear fender. Comes with dual intensity (high/low). All LEDs function in running mode.

Dimensions: 2.25" Length x 2.25" Height x .85" Depth
A total of 45 RED LEDs.

Vertical Side Mount Tag Holder

Now you can move the your tag to the side! With the Vertical Sidemount Tag (VST) Holder you can lose the stock license assembly and reveal a clean looking rear. The VST is laser cut from mirror finish, stainless steel and attaches easily to the left side of the bike. Since we use a Radiantz LED to light the license plate, there is illumination off the rear tire that looks sick at night. A complete wire kit and instructions is included. Installation takes about 45 minutes and can be done in your garage. The stock license assembly unbolts easily and with our Stock Turn Signal Relocator, you can use your stock signals.

Made to fit license plates that measure 7"L X 4"W. The VST can be purchased with or without Aeromach's Stock Turn Signal Relocator.

AM-8600SSP VST w/ Stock Turn Signal Relocator for Kawasaki Mean Streak $265.95 ea

AM-8620SSP VST w/o Stock Turn Signal Relocator for Kawasaki Mean Streak $254.95 ea

7 inch "Chopper Risers" for Kawasaki Cruisers

Looking for risers that have attitude? Chances are, if you wanted a chopper style riser, you had to buy a set that were made for HD and you had to modify your bike. We designed these risers to bolt right on to your Kawasaki. When used with the 35 degree drag bars they bring your hands back 2 inches

For most bikes, longer control (clutch and brake) cables will not be needed. For Mean Streak, stock cables will work but view of Speedo & Tach will be obstructed. Installation is simple and the top bolts are concealed by the pointed cap. The 7" risers are chrome plated, extruded billet aluminum. Drag bars sold separately. Installation bolts included

AM-3850C  7 Inch Chopper Risers with Domed Cap $134.95 pair
AM-3860C  7 Inch Chopper Risers with Tribal Cap $134.95 pai

35 Degree Drag Bar with 1" Diameter

• 35 degree bend
• 12" of pullback
• 8" Center
• 28.5" Width

Chrome Handlebar without knurls or dimples - cannot run cables through bars.

AM-3700C 35 DEGREE BEND HANDLEBAR FOR KAWASAKI $55.99 ea

New Seat for Mean Streak

This versatile seat has the custom look of a deep, solo saddle with a fastback tail. The seat pan is made from fiberglass so it is strong, flexible, light and conforms to your "Meanie" better. The bottom of the seat is lined with felt so it won't scratch the paint. You can feel the injected foam working hard to keep your butt from getting sore, but the best feature of all is the overall low profile of this seat, allowing a better riding position and clean leg passage. Comes with a 90-day warranty from manufacturer defects.

Tail Spikes for Mean Streak

Got spikes? The Tail Spikes replace the two allen head bolts on the fender strut and install in minutes. Designed not to interfere with the passengers leg passage.

Tail Spikes are made of polished stainless steel. They keep the curious from getting too close. Sold in sets of 4 only.

AM- 8400SSP KAWASAKI MEAN STREAK TAIL SPIKES $52.45 set

Billet Warheads for Front Axle Concealment

Drop the bomb! The next generation has arrived. Are you ready?

These mean little monsters slide over your forks and are designed to portray aggressive, unruly and unsocial behavior. Forget what everybody else is bolt'n on their bike! You lead the trend.

Guaranteed to make em circle and stare at the next rally.

Warheads are machined from extruded billet aluminum and chrome plated.

They bite on with two set screws per part.

Come in Smooth and Speed Milled.

Fits Nomad, Classic, Drifter and Mean Streak.
*Note: Mean Streak requires a bolt kit for $5.95

Smooth & Milled Warheads $134.95 pair
Smooth & Milled Warheads for Mean Streak $139.95 pair

Billet Warheads for Front Axle Concealment

Drop the bomb! The next generation has arrived. Are you ready?

These mean little monsters slide over your forks and are designed to portray aggressive, unruly and unsocial behavior. Forget what everybody else is bolt'n on their bike! You lead the trend.

Guaranteed to make em circle and stare at the next rally.

Warheads are machined from extruded billet aluminum and chrome plated.

They bite on with two set screws per part.

Come in Smooth and Speed Milled.

Fits Nomad, Classic, Drifter and Mean Streak.
*Note: Mean Streak requires a bolt kit for $5.95

Tribal Flame Grips

Tribal Flame Grips made from solid T6 billet aluminum. These billet grips are chrome plated and have a unique tribal flame pattern. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip.

Smooth Grips

The Billet Grips are made from solid T6 billet aluminum. These machined grips are chrome plated and perfectly smooth. The caps at the end are threaded and can be removed to add a mirror to the end of the left grip with Aeromach's "Grip End" piece. The billet grips are for 1" diameter handlebars and fits almost all metric cruisers. The stock handlebars on metric bikes are 1" diameter.

AM-2400C Smooth Motorcycle Grips $119.95 pair

Grip End piece for Mounting Mirrors to Grips

The Grip End piece allows you to add an Aeromach mirror to the end of your Aeromach grip (left side only). Simply remove the threaded cap from the left side and thread on the Grip End pc. Then select an Aeromach mirror to attach to the end of your grip. We find that the small oval, large oval, classic round and street fighter look the best.

*Note, mirrors are sold seperately.

AM-2285LC Grip End for mounting Aeromach motorcycle mirrors (left) $46.95

6  Inch Pullback Risers - Long Necks

Not happy with your equipment? Are your parts lacking in length? If 4 inches of rise is just not enough for you and your passenger, then we have your aid. Aeromach has doubled the fun by pumping out a total of 6 inches of chromed, billet delight for the Mean Streak.

These risers come way back and were designed specifically for your metric bike. They work great with drag bars. Longer control cables are NOT required. A new drag bar will be needed to use with the 6" risers. The stock handlebar is a "T Bar" and is welded together. We recommend the 35 degree drag bar for maximum pullback.

A new drag bar will need to be purchased to use with the 6" risers on the Mean Streak. The stock handlebar is a "T Bar" and is welded together.

The single piece top clamp can be used on the 6 inch Long Neck Risers.

AM-3310C 6 inch pullback risers - long necks $144.95 pair

Reaper Top Clamp

A uniquely machined, single piece top clamp made to fit Aeromach's pullback risers. Made from T6 billet aluminum, dipped in chrome. For Mean Streak only at this time.

Windshield Extensions for Nomad

Prevent air from passing under the bottom edge of the windshield. Designed by Weldon-Sheldon's Fabrication, these extensions are water cut from mirror finish, stainless steel and made to fit the stock windshield in its highest position. If needed, the extensions can be cut for adjustment. Can be used with Fire & Steel or Cobra Spotlight kits. Stainless steel bolts, lock washers and acorn nuts are included.

AM-9220S Windshield Extensions for Nomad $135.00 pair

Get Back! Leather Straps

The Get Backs! clip to your clutch lever and have a quick release so you can
remove them at a moment's notice. This Old School strap is convenient for
annoying dogs that like to chase bikes.

The strap is 29" in length and available in black only. Fits all clutch
levers.

Billet Drink Holder & Stainless Steel Cup motorcycle drink holder

A cup holder that really works! Keeps coffee hot and water cold (not to mention anything else you put in it). Made to mount most anywhere on a handlebar.

Available in Chrome, Black or Silver Anodized. 1" or 1.25" bars.
a.. Patented bracket and faceted ring are constructed of machined aluminum.
a.. 16-oz. cup is 100% stainless steel-insulated and spill-proof.
a.. Detachable components make the task of storage quick and effortless.

AM-8420C Chrome Ring for 1" bars $79.95 ea
AM-8425C Chrome Ring for 1.25" bars $79.95 ea
AM-8430Bk Black Ring for 1" bars $74.95 ea
AM-8435Slvr Silver Ring for 1" bars $74.95 ea