Honda mini trail parts now
available from replacement engines to carburators air filters and
more.Honda engines,CT70 parts, mini-bikes engines, vintage motorcycles
engines, vintage bikes engines, classic motorcycles engines, Honda
CT-70 engines,Honda mini-trail If you do not see what you need please
gives us a call @ 786-525-5832 or send us an e-mail @
sales@rnrfabrication.com. For Honda Minitrail Replicas click
here. Click
here for wiring diagrams.
***
Note: The Trail Ryder 110cc has been
specially geared for more top end. The standard Lifan engine has a 14
tooth drive sprocket, for our application we use a 16 tooth drive
sprocket allowing a 20% increase in top end speed.
Convenient
accessories to
strap on your supplies for that trip up the trail. Replaces grab bar on
CT70s and clones.
To see if this luggage rack will fit your bike, please refer to the
pictures on the left, respectively. You need to make sure that there is
not a turn signal in the way. If there is this rack may not be the
right one for you. Other wise take a look at how this fits on the 2006
Trail Ryder and how it lines up with the 1970 Trail 70.
Item # : rack001
Originally
designed to go with
the Honda CT70, this lockset will fit our Trail Ryder and other custom
bikes. All locksets are individually keyed.
Item # : DF4LokSet
This
is the complete control
assembly for the TrailRyder or Pitbull bike.
It has the Hi/Low light selector, Turn signals, Horn, Choke lever, and
All wiring
Item # DF-4LHGrip
Capacitive
Discharge Ignition
Unit (CDI) for Lifan Horizontal Engines, 70cc-125cc, with 12 volt
charging systems. It will also work with all other Chinese makes.
Item # : L_CDI
This
is a 12 volt starter
relay or solenoid. This is a high amperage solenoid switch use to
supply the electrical needs of the starter motor. A low amperage
starter button is used to activate the relay.
Item # : start_relay
This
fits our TrailRyder and
Pitbull.
This also may fit various years of CT70's or Z50's with a similar
mounting plate.
The distance between the mounting bolts is 90mm
Item # : HandleBarClamp
A
rectifier is used to change
the A/C current that the motorcycle''s stator emits into D/C. It also
regulates the voltage. This is required to charge a battery.
DF4
Grab Bar.
This is a substitute for the luggage rack for our Trail Ryder.
This product will bolt in the place of the luggage rack on the Honda
Trail bikes and on our Trail Ryder’s. In addition it will fit
on some custom bikes.
Item # : GrbBar
This
is a digital copy
of the owners manual that is supplied with our bikes. The file is 4.25
MB and can be emailed without shipping charges. If you choose, a CD it
will be mailed for the minimum shipping charge.
